SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / Radio Communication / Antennas / Ham, Amateur Radio Antennas
This matching transformer is perfect for working DX with your 100 watt rig on 20 meters. PROVIDE YOUR OWN ELEMENT WIRE FOR THIS END FED HALF WAVE TRANSFORMER.Wire length required: 66' 6" for 10 thru 40 meters, 133' for 10 thru 80 meters.
Each unit is custom built and tested for maximum performance.
Ideal for HOA, POTA, SOTA, and base stations.
Employs two T-140 toroids in a unun transformer wound with 18awg copper magnet wire.
Stainless steel hardware.
Matched for 50 ohm coaxial cable with PL-259 connector.
SWR average aprox. 1.5/1, slightly higher on 10 meters.
Weather proof encased circuitry eliminates faulty and corroded connections and components.
Conservatively rated at 100 watts SSB & CW, 70 watts on DIGITAL, intermittant amateur service.
Easy installation, try various configurations, many work well.
Works well even at heights less than 15 feet and small lots.
Operates on 10 15 17 20 & 40 meters, (longer wire element for 10 thru 80 meters) all with a single 50 ohm coaxial transmission line, no antenna switch required.
This is probably the best performing multi-band wire antenna I have built and used in the past 50+ years. The performance is surprising considering the bandwidth and appearant low angle of radiation (for dx), even when installed at low heights above ground.
For safety purposes keep antennas clear and away from power lines.
Returns Accepted for this item if it's within 30 Days