SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / Radio Communication / Antennas / Ham, Amateur Radio Antennas
T3FD TERMINATED FOLDED DIPOLE AMATEUR RADIO ANTENNA KIT. THIS IS A KIT, ASSEMBLED T3FD ANTENNAS AVAILABLE AT DIPOLES USA THIS IS A LARGE ANTENNA AND REQUIRES AN EXCELLENT SUPPORT SYSTEM. TYPICALLY TWO 35-40 FOOT MAST OR SIMILAR, or 35’ to 15’ SLOPE CONFIGURATION. THIS IS A LARGE ANTENNA AS BUILT MEASURES 200 FEET BY 4 FEET WIDE FREE SHIPPING TO USA (THE LOWER 48 STATES) AMERICAN MADE PARTS Dipoles USA T3FD-200 500 Watt version DESIGNED TO WORK AT 35 FOOT HEIGHT. GREAT AS NVIS OR DX ANTENNA AS SLOPER. You will receive: 1) 4 Each of Outer wire loop, Coiled2) 2 Each Center wires, Coiled3) 2 Each Black Dog Bone End insulators 4) 2 Each White ½-inch by 4-foot predrilled spreader with attached rubber rings5) 14 Each Gray 3/8-inch by 4-foot predrilled spreader with attached rubber rings6) 1 Each Center Insulators ½-inch outdoor PVC pipe with six through holes (for resistor)7) 2 Each Middle Insulators ½-inch outdoor PVC pipe with four through holes8) 1 Each Load resistor9) 1 Each 600 Ohm Broadband Matching Transformer10) 35 feet 600 Ohm Open Ladder Line 11) 12 @ 5/16” Crimp type connectors (Eye) 12) 2 @ #10 Crimp type connectors (Eye) 13) 2 @ ¼ inch Fork Type Crimp Connectors 14) 2 @ Stainless Steel #10 machine screw, lock washer, flat washer, and Lock nut (for resistor) 15) 4 @ 5/16” -18 x ½” Stainless Steel bolt, lock washer, flat washer, and nut 16) 16 @ 3/4” pieces of Outdoor Heat Shrink 17) 60 @ 3 ½-inch 17 AWG Aluminum Wire (3 per spreader) 18) 2 @ 6-inch 17 AWG Aluminum Wire (In bag 2 and 3) 19) 1 @ 35’ 600 ohm open-wire feedline 20) 1 @ 250’ Spool 5/32” Dacron DUSA rope black 21) 2 @ 100’ Hanks 5/32” Dacron DUSA rope black 22) 1 @ Roll of Coax Seal 23) 1 @ Roll Black Electrical Tape 24) INSTRUCTIONS 25) ONLINE HOW-TO VIDEOS THANKS FOR LOOKING. THE PRICE INCLUDES FREE PRIORITY SHIPPING to the USA! Ships Worldwide via the EBAY Global Shipping Program for a Fee. DISCLAIMER: I am selling this antenna kit with the understanding that (YOU) a Trained and Licensed Amateur Radio Operator will be installing this antenna and will follow all safety precautions. Please don't buy this or any antenna until you know how to install it safely. NEVER INSTALL ANTENNAS NEAR POWER LINES OR INSTALL IN A WAY THAT COULD COME INTO CONTACT WITH POWER LINES IF THE ANTENNA SYSTEM SHOULD FALL OR FAIL. CHECK YOUR LOCAL BUILDING AND ELECTRICAL CODES BEFORE INSTALLING. THE PICTURES INCLUDED IN THIS LISTING THAT SHOW ANYTHING BESIDES THE ANTENNA PARTS LISTED ABOVE ARE FOR THE PURPOSE OF SHOWING POTENTIAL BUYERS THE MATERIALS USED TO CONSTRUCT THIS ANTENNA AND ARE NOT A PART OF THE LISTING. MADE IN AMERICA by HAMS Please contact me with any questions. 73 Mike
Returns Accepted for this item if it's within 30 Days