40/15 METER TRANSCEVING DIPOLE ANTENNA + ALL BAND SHORTWAVE RECEINING

3D printed water thigh housing with a SO-239 connector, 2 insulators, and 4 tie wraps to secure the wire to the insulators after tunning antenna (if needed).
This 40 / 15-meter dipole antenna has a total length of 70 ft.(35ft each side), 7MHZ 1/2 wavelength; can be tune from 40-meter band or higher.
Using 16AWG multi-string wire, recommended up to 100Watts output.
The center section is 2.610" wide x  2.650" high x 1.420" deep with a .385" hole on the top section for mounting option.
The insulators are one solid piece with a channel to loop and secure you antenna wire, 3.130" long x 1.180" wide x 1.0" deep, and a .385 hole to mount. This antenna is also a great all band shortwave radio / Ham receiving antenna! Can be installed as a  inverted V for omni directional receiving and transmitting. Recommended Hight  of 25 to 30 feet if possible.
If you have any question or will like a lower frequency antenna, please feel free to contact me.
Thanks for stopping by.

Returns Accepted for this item if it's within 30 Days