SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / Radio Communication / Antennas / Ham, Amateur Radio Antennas
Positive Propagation Products The not so random, 42-foot random
wire antenna! Your new antenna is ready to go
right out of the bag. Once it is in the
air, just plug in your coax and you are on the air. What is in the bag. · 42 feet of Davis RF wire · 9:1 unun impedance transformer ( Fair-Rite 240-43 Toroid wound with high temp tape and magnet wire) · 100 feet of 3/16 th Synthetic
Textiles antenna rope. Cut in 80 and 20 foot lengths. · Custom designed Positive Propagation Winder. · 2 steel stakes. · A wrap to hold it tight. · A bag to put it all in. Some FAQs Made in the USA? Yes! Definitely, assembled right here and
all the major components are from US manufacturers. What bands does it work on? Keeping in mind that each
deployment is unique, the antenna is designed to have an SWR of less than 3 to
1 on all the major bands, including: 40, 20, 15, and 10 meters. It also has an
SWR of less than 3 to 1 on 60, 17, and 12 meters. Most internal tuners will easily be able to
tune those bands. Additionally, it has an SWR of less than 5 to 1, which can be
tuned by many tuners on 80 and 30 meters. How can I deploy it? Not every deployment is the same. The
antenna design and the SWR has been tested with the antenna at approximately a 45-degree
angle with the unun at 6 to 7 feet off the ground. However, you can use it as a
vertical or as an inverted L or even an inverted V and hang it by the center of
the wire with an insulator. What length coax should I get? It is suggested that a coax
length of at least 50 foot be used with 9:1 antennas. The shield of the coax
will act as ground side of the antenna. However, I have used shorter coax lengths with no problems. What does that round thing do? The 9:1 unun impedance
transformer is made to bring the approximately 450 ohms of the endfed wire
antenna down to 50 ohms to match your coax radio system. What is special about this antenna? The unun design is a
proven design which has been around for many years. This unun and winder system is made to be
deployed quickly and to keep it organized with less extra gear and less
tangling of the wire and rope. Do I have to use the figure 8 winding method when putting
the rope and wire back on the winder? Yes, unless you want a big, tangled mess.
The winder is made to use the figure 8 winding system. This is the key to
keeping your rope and wire organized. Does size matter? Yes, it does. Many antennas will handle
100 watts in a smaller package but why go with smaller when the larger 240 size toroid
handles more power without heating up as quickly, the larger gauge wire and
diameter rope have a higher braking strength and the larger winder allows all
the components to be organized on one unit. FREE USPS priority mail shipping to the Contiguous United States
Returns Accepted for this item if it's within 14 Days