SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / Radio Communication / Ham, Amateur Radio / Other Ham Radio Equipment
Amateur Antenna Selector Box, DIY. This is Not a 'ready to go item'. This is a 'switching kit', you will have to figure out which new capacitors will be needed and how to hook every thing up. It is designed to feed an Automatic Antenna Tuner and help it be more efficient. Antenna Tuner Helper My commercial Auto Tuner does a really good job of tuning
my antenna but I have found a way to help it out. This is the ‘Tuner Helper’, It makes band switching a little easier. It does this by using a
few external components to reduce the range that that your regular antenna tuner it must tune. The internal matching
components all have to be small enough to fit inside the case so they can’t
have the Q or efficiency of an external component. Every band is going
to be different so what I do is to find a close match with the external component
and let the Auto Tuner do the final trimming to make up the difference. For
other bands I some times need an external series capacitor. I use HV capacitors with a value that almost tunes the antenna and again let the auto tuner
do the final trimming. Some lengths of
wire won’t tune at all and external components and/or a balun can solve that
problem. No balun is included with this item. It uses a rotary switch to cut these external components in and out of the
circuit, but the connections could be made with clip leads. The values seen in
the schematic will vary depending on the length of your antenna wire.
Returns Accepted for this item if it's within 30 Days