ASSEMBLED 120 FOOT 500 WATT T3FD TERMINATED FOLDED DIPOLE AMATEUR

ASSEMBLED
ASSEMBLED T3FD TERMINATED FOLDED DIPOLE AMATEUR RADIO ANTENNA DESIGNED TO WORK AT ONLY 35 FEET ELEVATION FLAT OR AS A SLOPER.
Meet the Engineer at Dipoles USA AND SAVE BIG
THIS IS A LARGE ANTENNA AND REQUIRES A GOOD SUPPORT SYSTEM.
THIS IS A LARGE ANTENNA AS BUILT MEASURES 120 FEET BY 4 FEET WIDE. SHIPPING WEIGHT IS 25 POUNDS.
FREE SHIPPING TO USA (THE LOWER 48 STATES)
AMERICAN MADE PARTS
Dipoles USA T3FD-120 500 Watt version
DESIGNED TO WORK AT 35 FOOT HEIGHT. GREAT AS NVIS ANTENNA AS SLOPER.
You will receive: ASSEMBLED T3FD. Below shows components used.
4 @ Outer loop wires (coiled) 14 awg stranded THHN
2 @ Center wires (coiled) 14 awg stranded THHN
2 @ End insulators
8 @ 4’ Spreader insulator 3/8 inch (10 YEAR WARRANTY)
2 @ 4’ Spreader insulator 1/2 inch (10 YEAR WARRANTY)
3 @ Middle insulators
1 @ Load resistor
1 @ Broad Band Matching Transformer (1.8-61 MHz)
12 @ 5/16” Crimp type connectors (Eye)
2 @ #10 Crimp type connectors (Eye)
2 @ Stainless Steel #10 machine screw, lock nut, flat washer (for resistor and feedline at cage)
6 @ 5/16” -18 x ½” Stainless Steel bolt, lock washer, flat washer, and nut
8 @ 1” pieces of Outdoor Heat shrink
24 @ 3 ½ ” Aluminum Wire (3 per spreader)
1 @ 35’ 600 ohm open-wire feedline
1 @ 250’ Spool 5/32” Dacron DUSA rope black
2 @ 100’ Hanks 5/32” Dacron DUSA rope black
1 @ Roll of Coax Seal
1 @ Roll Black Electrical Tape
1 @ Bag of spare ties
INSTRUCTIONS
ON LINE VIDEO INSTRUCTIONS
THANKS FOR LOOKING.
THE PRICE INCLUDES FREE PRIORITY SHIPPING to the USA! Ships Worldwide via the EBAY Global Shipping Program for a Fee.
DISCLAIMER: I am selling this antenna kit with the understanding that (YOU) a Trained and Licensed Amateur Radio Operator will be installing this antenna and will follow all safety precautions. Please don't buy this or any antenna until you know how to install it safely. NEVER INSTALL ANTENNAS NEAR POWER LINES OR INSTALL IN A WAY THAT COULD COME INTO CONTACT WITH POWER LINES IF THE ANTENNA SYSTEM SHOULD FALL OR FAIL. CHECK YOUR LOCAL BUILDING AND ELECTRICAL CODES BEFORE INSTALLING.
THE PICTURES INCLUDED IN THIS LISTING THAT SHOW ANYTHING BESIDES THE ANTENNA PARTS LISTED ABOVE ARE FOR THE PURPOSE OF SHOWING POTENTIAL BUYERS THE MATERIALS USED TO CONSTRUCT THIS ANTENNA AND ARE NOT A PART OF THE LISTING.
MADE IN AMERICA by HAMS
Please contact me with any questions.
73 Mike
DIPOLES USA LLC 🇺🇸

Returns Accepted for this item if it's within 30 Days