You must have javascript enabled to use antennasi.com !

Bluetooth Module Wireless Transceiver TTL Serial External Antenna

Master Slave

USD $8.95

Condition : Open box

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Computers/Tablets & Networking / Home Networking & Connectivity / USB Bluetooth Adapters/Dongles

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $

This is a very small module. The module has scalloped edge pins that allow it to me surface mounted to a main board, carrier board or shield for your project. There is a RF Pad on the bottom of the board and also one pin on the edge of the board has the antenna output. For minimal operation only 5 pins are used, RX,TX, 3.3V, GND and Antenna. The Bluetooth module uses a simple command set to configure and connect to another device. The data transfer rate of up to 250kbps of continuous data throughput is supported. The module requires 3.3V at 125uA standby and up to 60 mA in pairing mode. The module is based on the CSR BlueCore™ Bluetooth Chip. This Chip supports both TTL Serial and USB with very few external components. These are great for Arduino to allow wirelessly communication to a PC or Smart Phone. These modules can be either Master or Slave so two modules can talk to each other and either can start the conversation. These modules are New Surplus. They have no box or manual. Specification and pinout will be provided. CSR is a chip manufacture and all Copyrights and Trademarks apply. BlueCore™ is Trademarked by CSR.

Returns Accepted for this item if it's within 30 Days

Bluetooth Module Wireless Transceiver TTL Serial External Antenna Master Slave
300 ohm twin lead antenna wire | dummy antenna | bobcat miner antenna | ptc antenna array | ultimax antennas
See more
Price type
IN STOCK OUT STOCK