SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / Radio Communication / Antennas / Ham, Amateur Radio Antennas
Insert the 8 11" horizontal elements with black tips into the upper radial hub and tighten.
Insert 2 33" both side threaded radials into lower 45 degree hub 180 degrees apart on the hub and tighten.
Insert the vertical element with coupler and set screw into the base hub and tighten.
Insert the upper vertical element with ball into the coupler and tighten.
Run coax cable up through 1-1 3/8" OD mast and connect PL259 connector to the antenna, then tighten the antenna hub to the mast.
When assembled this antenna is about 6 feet from top to bottom and about 3 ft in diameter. It must be mounted on a mast due to the radials. We combine shipping. Please email or request a revised total from us if the calculated shipping does not look correct!!!
Returns Accepted for this item if it's within 30 Days