Brand New Cambium Networks Canopy PMP 430 5781APUS OFDM Access Point with Sector Antenna and AES Encryption, 5725-5875 MHz If you have any questions, please contact us. PoE Injector is Not included.
The Cambium Point-to-Multipoint (PMP) 430 Access Point and Subscriber Module is the ideal solution for developing, enhancing and extending advanced broadband networks with more than 50 Mbps of total aggregate throughput for data transfer, voice and video applications. Based on OFDM technology, the PMP 430 offers robust performance, even in near or non line-of-sight (nLOS or NLOS) conditions. Cambium Networks products combine field-proven toughness with exceptional performance, security, ease-of-use and cost effectiveness.
Because of GPS Synchronization, Access Points can be co-located on the same tower location with other Cambium PMP. Subscriber Modules can be purchased with throughputs of 4, 10, 20 or Uncapped Mbps and throughput can be enhanced to existing modules via a fixed software license.
Cambium Networks provides exceptional wireless broadband connectivity solutions. With more than 3 million modules deployed in thousands of networks around the world, Cambium solutions are proven to provide cost effective, reliable data, voice and video connectivity. SPECIFICATIONS CHANNEL
SPACING Configurable on 2.5 MHz increments for 5 MHz Channel
Configurable on 5 MHz increments for 10 and 20 MHz Channels FREQUENCY
RANGE 5725-5875 MHz CHANNEL
WIDTH 5 MHz, 10 MHz or 20 MHz PHYSICAL
LAYER OFDM 256FFT MAC (MEDIA
ACCESS CONTROL) LAYER Cambium Proprietary ETHERNET
INTERFACE 10/100BaseT, half/full duplex, rate auto negotiated (802.3
compliant) PROTOCOLS
USED IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP NETWORK
MANAGEMENT HTTP, Telnet, FTP, SNMPv2c, Prizm 3.3 and One Point Wireless
Manager 2.2 VLAN 802.1ad
(DVLAN Q-in-Q), 802.1Q with 802.1p priority, dynamic port VID CYCLIC
PREFIX 1/4, 1/8 or 1/16 fixed SUBSCRIBERS
PER SECTOR Up to 200 ARQ Yes COLLOCATION
WITH PMP 58100 Yes, 10MHz guard band required or 5MHz with 3 ft vertical
required; synchronization required COLLOCATION
WITH PMP 54100 Yes, 10MHz guard band separation or 5MHz with 3 ft vertical
required; synchronization
required COLLOCATION
WITH PMP 52100 YES MODULATION LEVELS (ADAPTIVE) 1X=QPSK, 2X=16QAM, 3X=64QAM LATENCY 5-7 ms FORWARD
ERROR CORRECTION 3/4 Reed-Solomon block coding PACKETS PER
SECOND 15,000 GPS
SYNCHRONIZATION Yes QUALITY OF
SERVICE DiffServ QoS MAX.
AGGREGATE THROUGHPUT PER SECTOR (@20MHZ CHANNEL) 1X: 16.5
Mbps, 2X: 32 Mbps, 3X: 50 Mbps MAX.
AGGREGATE THROUGHPUT PER SECTOR (@10MHZ CHANNEL) 1X: 8 Mbps,
2X: 16.5Mbps, 3X: 24.5Mbps MAX.
AGGREGATE THROUGHPUT PER SECTOR (@5 MHZ CHANNEL) 1X: 3.5
Mbps, 2X: 7 Mbps, 3X: 10.5 Mbps ANTENNA BEAM
WIDTH 4 sector application (actual 3 dB antenna pattern: 65° azimuth 7°
elevation; Triple null fill) TRANSMIT
POWER -30 to +21 dBm (to EIRP limit by region) (1dBm interval) ANTENNA GAIN 17 dBi (w/ included sector antenna) MAXIMUM
TRANSMIT POWER 21 dBm EIRP 36 dBm FCC TYPICAL LOS
RANGE 1X: 11 mi. (18 km), 2X: 5 mi. (8 km), 3X: 2.25 mi. (3.6 km) WIND LOADING 90 lbs. ANTENNA
CONNECTION 50 ohm N-type MEAN TIME
BETWEEN FAILURE > 60 Years ENVIRONMENTAL IP55 TEMPERATURE -40°C to
+55°C (-40°F to +131°F) WEIGHT Radio: 2.8
kg (6.1 lbs.) W/Antenna:
6.1 kg (13.5 lbs.) WIND
SURVIVAL 190 km/hour (118 mi/hour) DIMENSIONS
(HxWxD) Radio: 35 x 21 x 11 cm (13.75” x 8.25” x 4.2”) W/Antenna:
51 x 21 x 28 cm (20.2” x 8.25” x 11”) MAXIMUM
POWER CONSUMPTION 19W INPUT
VOLTAGE 24 to 59V ENCRYPTION 128-bit AES
Returns Accepted for this item if it's within 30 Days