SKU: N/AThis site contains affiliate links for which we may be compensated
Business & Industrial / Facility Maintenance & Safety / Access Control Equipment / Keyless Access Systems / RFID Readers & Writers
CHAFON CF-RU6401 900mhz Long Range UHF impinj R2000 RFID engine POE Reader- 2 Antenna Ports. Reader Power Supply and accessories are not included. GENERAL DESCRIPTION CF-RU6401 is a
high performance UHF RFID fixed reader. It is designed upon fully
self-intellectual property. Based on proprietory efficient digital signal
processing algorithm, it supports fast tag read/write operation with high
identification rate. It can be widely applied in many RFID application systems
such as logistics, access control, anti-counterfeit and industrial production process
control system. FEATURES l Self-intellectual
property; l Designed with
Impinj R2000 RFID engine; l Support
ISO18000-6C(EPC C1G2) , ISO18000-6B protocol tag; l 860~868MHz/902~928MHz
frequency band(frequency customization optional); l FHSS or Fix
Frequency transmission; l RF output
power up to 30dbm(adjustable); l 4 TNC antenna
port with antenna auto-tuning and failure-detection; l Support
auto-running, answer, trigger and real-time-inventory work mode; l Tag buffer
size up to 800PCS (Max. 496bits EPC length); l Support EPC
and TID inventory; l Low power
dissipation with single +9 DC power supply; l Support RS232,
RS485, RJ45(TCPIP) with WiFi and POE optional; l High
reliability design; l Support
on-the-site firmware upgrading and optional Wince or Linux Operation System. CHARACTERISTICS l Absolute Maximum Rating ITEM SYMBOL VALUE UNIT Power Supply VCC 16 V Operating Temp. T OPR -10~+60 ℃ Storage
Temp. T STR -20~+75 ℃ l Electrical and Mechanical Specification Under T A = 25 ℃ , VCC = +9V unless
specified ITEM SYMBOL MIN TYP MAX UNIT Power Supply VCC 8 9 12 V Current Dissipation IC 800 1500 mA Frequency F REQ 902 902~928 928 MHz Size Size 310×210×41 mm 1 . Power J1 No. Symbol Comment 2 PWR +9VDC 4 GND Ground 1,3 NC Reserved 2 . WiFi
Antenna J2 (SMA Female) 3. USB J3 (Slave) 4. USB J4 (Reserved) 5. TCPIP RJ45 Socket J5 6. UART J6 (RS232 DB9 Female) No. Symbol Comment 1 NC Reserved 2 TXD Data output in RS232 3 RXD Data input
in RS232 4 NC Reserved 5 GND Ground 6 NC Reserved 7 NC Reserved 8 NC Reserved 9 NC Reserved 7. GPIO J7 (DB15 Female) No. Symbol Comment 1 Output1 General
output1 2 Output2 General output2 3 Output3 General
output3 4 Output4 General output4 5 Input1 General
Intput1 with Internal 47k resistor pulled-down to ground 6 Input2 General Intput2 with Internal 47k resistor
pulled-down to ground 7 Input3 General
Intput3 with Internal 47k resistor pulled-down to ground 8 Input4 General Intput4 with Internal 47k resistor
pulled-down to ground 9 TGIN Trigger
input with internal 10k resistor pulled-up to +5V 10 R+ R+ in RS485 11 R- R- in RS485 12 GND Ground 13 NC Normal-Close
terminal of internal relay 14 NO Normal-Open terminal of internal relay 15 CM Common
terminal of internal relay 8 . TNC
Antenna Port1~Port4 J8~J11 9 . LED
indicator Symbol Comment POWER Power on
indicator RUN Command-executing indicator TAG Tag-detected
indicator WIRELESS WiFi active indicator ALARM Alarm
indicator 1~9 RSSI indicator