You must have javascript enabled to use antennasi.com !

DJI Mini 3/Mini 2/DJI Mavic 3/Air 2/2s RC/Remote Controller Yagi

Antenna Booster

USD $23.00

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Cameras & Photo / Camera, Drone & Photo Accessories / Camera Drone Accessories

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $

Rabbit EARS™ Dual Band Antenna Signal Booster for DJI Mini 2, Mavic Air 2, Air 2 S, Mavic 3 and Mini 3 Pro Drone Devices | Maxi Marine Rabbit EARS™ Dual Band antenna signal booster (range extender) is designed to take full advantage of DJI's OcuSync 2.0 / 3.0 by supporting the new automatic band hopping between 2.4 and 5.8 GHz frequencies, which maintains the strongest signal available during flight. This also eliminates having to manually set the band (2.4 or 5.8 GHz) in the DJI Fly App according to which antenna signal booster is being used, and physically switching and carrying two sets of antennas for different environmental conditions (urban/rural). Made in the USA, patent 10910730 and patent pending. Antenna Booster Design For improved signal strength Rabbit EARS™ Dual Band antenna signal booster uses patented micro/mini pin technology suspended in an extremely low density foam body, which provides greater accuracy in it's frequency response and less signal blockage, for the DJI Mini 2, Mavic Air 2 , Air 2 S, Mavic 3 and Mini 3 Pro controller antennas. If we take a closer look at the DJI antenna (see item photos), it is unusually thick unlike previous DJI drone antennas and inside there are two elements instead of one. The front element is the driven element connected to the wiring of the controller and the back element reflects the signal back to the front element and is called a reflector. These elements are familiar to Yagi-Uda antenna designs which also have director elements in front of the driven element. Since the DJI controller antenna already has a reflector element it doesn't benefit with an additional one behind it, and can only benefit with director elements added in front of the driven element. The director elements must be properly spaced (progressively) and tuned in length for the controller/drone, and made with special polished alloy to reduce electrical surface resistivity for optimal performance, unlike existing antenna boosters. Booster Attachment    To attach each antenna booster align the slotted end up to the side of the DJI antenna and the alignment slot with the rubber phone pad holder, then slide into place and gently press the antenna booster to secure in place (see item photos) . Each antenna booster can be used on either side of the antenna. For the best performance, make no changes to the default Fly App transmission settings (Dual-band, Auto).  If there is little improvement, under " transmission" set the frequency to " 5.8 GHz" (in Auto) then immediately back to " Dual-band" (in Auto) with the antenna booster attached .  This will start " Dual-band" on 5.8 GHz for the least interference and automatically change according to the best frequency for use with the antenna booster .   Specifications Length:    170mm (2.75 inches) W idth: 155mm (2.37 inches) Thickness : 10mm ( .39 inches) Weight: 13.0 grams (.46 oz)

Returns Accepted for this item if it's within 30 Days

DJI Mini 3/Mini 2/DJI Mavic 3/Air 2/2s RC/Remote Controller Yagi Antenna Booster
2022 nissan rogue antenna | ford antenna | subaru impreza antenna replacement | retro antenna | 1998 4runner antenna
See more
Price type
IN STOCK OUT STOCK