SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / Radio Communication / Antennas / Ham, Amateur Radio Antennas
Ferrite bead Unun 1:4 Variable For End Fed Half-Wave (EFHW) antenna 100+W. With just the single bead and the few turns shown, I am getting excellent VSWR readings on 10/15/20/40 meters with just one sloper length. It employs a type 43 bead core wound with #18 wire. Sloper length measures 68 ft +- a little to really zero in on a particular band. Will tune 20/10 with 34 ft. 10 only with 17.5. Order one of mine or make your own, they are dead easy to wind. The key to it's excellent performance is the radiator length and the ability to match very close to 50 ohms. As you might surmise, many of my devices cross from random wire to EFHW resonant. Case in point, with the winding ratio as shown, impedance ratio is actually around 1:4. Add a turns to make 1:3, and you get the 1:9 impedance ratio. Hence the term "variable'. It's whatever floats your boat! BNC connector available on request.
Returns Accepted for this item if it's within 30 Days