SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / Radio Communication / Antennas / Ham, Amateur Radio Antennas
Fan halfwave dipole antenna: 80/40/20 meters3-Ft-240/31 cores Wound with #12awg magnet wire All stainless steel hardwarePoly-Stealth 13 wire used for the legsAll connections crimped and soldered Adhesive lined heat shrink covering all connectionsThe 3 element fan dipole works very well at covering all the bands 80-6 meters, while using a tuner on the non-resonant bands reduce power. This antenna will be custom made for you. HF (1.8-30 mHz) 3-cores FT-240 31 50 ohm input COAX fed. 5KW/SSB 2KW/ CW/RTTY. Where it is resonant, if using a tuner reduce power as to not saturate the cores.Poly-Stealth 13 used for the elements ie. legs. Advantages to Poly-STEALTH ™ High Strength Aerial WiresIdeal balance of strength and flexibilityLow-Gloss finish and small size makes wire disappear into the backgroundSuperior abrasion resistance for running through treesUV & Weather resistant for use on the seacoast or in other harsh environments subjected to acid rain, high wind, or high snow and ice loads.Simply move the dog bone up or down the Poly-Stealth to your desired frequency. This antenna can be hung either in a Flat-Top or Inverted V configuration. Total approximate length 130'. Every connection crimped, soldered and adhesive lined heat shrink covered.Legal Limit ++++++++Add your 50 Ohm coaxial feed line, suspension rope and go.NOTE *** A wide range tuner can be used to tune this antenna to 80-6 meters
Returns Accepted for this item if it's within 14 Days