Shakespeare Model 4287-A NVIS HF TILT WHIP ADAPTER RF-1980F-AT001/RF-1980-AT001 New old stock. Comes with aftermarket base plate adapter. 5/8" threads on connector Model 4287-A Shakespeare Tilt Whip Adapter with Coaxial Feed Point Shakespeare Part Number 4287-1A, 4287A, 4289A Marine Corps Part Number 93010G0000, 93010H0000, 93010J0000 Vehicle Applications AAV-C7, LAV-25, LAV-C2 • Antenna spring base with tilt whip adapter built in • Use with 16’ or 32’ antenna, 16’ MFG recommended • Forward or reverse tilt • 12° offset built into base • Spring loaded locking pin allows quick change of tilt settings at vertical, 50º, 70º, 90º • UHF Bulkhead connector • Rated 1 KW 2-30 MHz
NVIS TILT WHIP ADAPTERS
The purpose of NVIS (Near Vertical Incident Signal) is to enable communications in the area commonly called the “Skip
Zone or “Dead Area.” This is accomplished by tilting the antenna so that its main radiating lobe is 73° to 83° above the
horizon. The higher radiating lobe causes the signal to bounce off the ionosphere, returning to the earth in the dead area
that may occur 10 to 150 miles out when using the antenna vertically.
The HF band is home to the most effective frequencies for NVIS applications: 4 to 12 MHz. Shakespeare’s Model 120
system is NVIS ready. The antennas can be mounted on a base, such as Model 4287A Spring Base, which has tilt
features built in along with a 12° tilt offset. This product is primarily used with the United States Marine Corps Light
Armored Vehicle (LAV) 25. RF-1980F-AT001/RF-1980-AT001 HF TILT WHIP ADAPTER