SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / Radio Communication / Antennas / Ham, Amateur Radio Antennas
This is a new addition to my 9:1 type 43 ferrite unun line. This one looks to be one of my best performing ones yet! It consists of a single large bead core. With a 68 ft sloper, I'm seeing excellent VSWR readings on 40 and 20 meters. 1.2-1 and 1.1-1 respectively. Adding a turn helps on 40. Long wire may need to be trimmed to get those numbers in the center of each band as well as angle of sloper and proximity to the ground. Ground capacitance does play a roll. But once you dial in the length, that's the only run you'll need. Also got very respectable numbers on 15 and 10. Comes with a 3:1 turns ratio which equates to a 9:1 impedance ratio. 4:1 is great as well. Seems to work the best for the above wire length but remember, my ununs are designed to be variable. In this case, this one ratio is good on a several bands without the use of a tuner. No cap is needed either. These cores have relatively low permeability so they aren't well suited as HF chokes but well suited for all band ununs. Note, I have been asked about performance on 80 meters. I tried out with 136 ft end fed and was pleasantly surprised with the numbers. !.2:1 VSWR. This was achieved with the addition of another high side turn (4). Also tunes well on the higher bands with the 68 footer. Will also tune 20/10 very well with a 34 footer. This unun appears to be my most versatile unun to tune all bands without the need of a tuner. Surprising how well it works with resonate EFHW's using such a low turns ratio. go figure.
Returns Accepted for this item if it's within 30 Days