You must have javascript enabled to use antennasi.com !

Palomar Engineers Ferrite Snap On RF Choke/Isolator - 1/2"/12.7mm

cable -5/10/15

USD $25.95

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: 5183 This site contains affiliate links for which we may be compensated Consumer Electronics / Radio Communication / Antennas / Ham, Amateur Radio Antennas

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $

Palomar Engineers Ferrite Snap On RF Choke/Isolator - 1/2"/12.7mm cable -5/10/15 Bead Option, 1-300 MHz
Use for 1/2″ Cable – RG8, RG213, LMR-400, etc.For 1/2” cables use five split beads for 80-10 meters (3-30 MHz) or ten split beads for 160-10 (1.8-30 MHz) meters or use 15 for even higher choking for 1-10 MHz. For 144 MHz use only 4 beads as they will provide > 500 ohms. Typical common mode suppression is -9 to 30 dB depending upon the number of beads and frequency. Quite often 20 dB is considered the minimum effective reduction. Typical Impedance per split bead: 10 MHz: 90 ohms, 25 MHz: 156 ohms, 100 MHz: 250 ohms, 250 MHz: 305 ohms A minimum impedance of 500 ohms is needed for 50 ohm cable or 10 times the cable impedance for other cables to make a measurable difference in common mode current suppression. The beads clamp to the cable and may be operated as is for indoor use. However, it is strongly suggested that they be covered to protect the plastic covers from weathering – use electrical tape for best results or heat shrink to ensure longer life. All kits come with instruction manual which covers assembly and application tips. As you can see from the impedance vs frequency graph, you can very effectively increase the choking impedance by increasing the number of beads on the cable.Snap On and Slip on Feed line chokes available in sizes to fix cables with outside diameters of 1/4", 3/8", 1/2", 3/4", 1" - check website for other size options.tech note: For RFI frequencies below 3.75 MHz, choose SNO75-1/2-5, 10 or 15 for improved common mode rejectionNote: Ferrite beads may be hexagonal or square shape depending on inventory on hand at time of order.
Palomar Engineers Ferrite Snap On RF Choke/Isolator - 1/2"/12.7mm cable -5/10/15 Bead Option, 1-300 MHz
Use for 1/2″ Cable – RG8, RG213, LMR-400, etc. For 1/2” cables use five split beads for 80-10 meters (3-30 MHz) or ten split beads for 160-10 (1.8-30 MHz) meters or use 15 for even higher choking for 1-10 MHz. For 144 MHz use only 4 beads as they will provide > 500 ohms. Typical common mode suppression is -9 to 30 dB depending upon the number of beads and frequency. Quite often 20 dB is considered the minimum effective reduction.
Typical Impedance per split bead: 10 MHz: 90 ohms, 25 MHz: 156 ohms, 100 MHz: 250 ohms, 250 MHz: 305 ohms A minimum impedance of 500 ohms is needed for 50 ohm cable or 10 times the cable impedance for other cables to make a measurable difference in common mode current suppression. – use electrical tape for best results or heat shrink to ensure longer life. All kits come with instruction manual which covers assembly and application tips.
As you can see from the impedance vs frequency graph, you can very effectively increase the choking impedance by increasing the number of beads on the cable.
Snap On and Slip on Feed line chokes available in sizes to fix cables with outside diameters of 1/4", 3/8", 1/2", 3/4", 1" - check website for other size options.
tech note: For RFI frequencies below 3.75 MHz, choose SNO75-1/2-5, 10 or 15 for improved common mode rejection Note: Ferrite beads may be hexagonal or square shape depending on inventory on hand at time of order.
×
×
×
×
×
×
×
×
×
Shipping info
Click the Shipping & Payments tab above the listing description for more info
Click the Shipping & Payments tab above the listing description for more info!
Additional delivery notes PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYMENT
Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.
Thank you for shopping with us on Pricetronic!
Additional Information
No additional information at this time Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
© PALOMAR-ENGINEERS.COM Shipping & Payments
Click the Shipping & Payments tab above the listing description for more info Payment
Accepted Payment Methods
Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.
Thank you for shopping with us on Pricetronic! Returns
Returns are not
accepted
Buyer will pay for return shipping. Additional Information:
All returns will be exchanged for like product or store credit provided they are returned within 30 days with original packaging and all manufactured products are in original shipped condition with unsealed product labels. All cash refunds subject to 15% restocking fee. Pricetronic integration
by
Palomar Engineers Ferrite Snap On RF Choke/Isolator - 1/2"/12.7mm cable -5/10/15
windsurfer antenna | router antenna | uniden scanner antenna | tacoma cb antenna mount | trinity antenna
See more
Price type
IN STOCK OUT STOCK