SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / Radio Communication / Ham, Amateur Radio / Ham Radio Transceivers
QRPGuys Portable 40/30/20m Tri-Band Vertical Antenna QRP KIT With permission from Joe Everhart, (N2CX), we have adapted his 40-30-20m
portable vertical antenna design using switched toroids for the base loading
inductance into a lightweight antenna for an easy outdoor setup. His full
article can be read on the July 2017 issue of The QRP Quarterly. With this kit,
user supplied wire, and an easy obtained vertical support, you can produce a
switched tri-band vertical antenna virtually anywhere. Joe has logged thousands
of NPOTA contacts in the last couple of years using his design. We have
incorporated his toroids and added a switched design into a small package that
will easily attach to the base of a telescoping fiberglass fishing rod used as
the vertical wire support. Low cost, telescoping 17′ fishing rods, that collapse
to 26″ are easily available through Pricetronic, and with user supplied 20-26awg wire
will make a tri-band vertical antenna. In absence of the the vertical support, a
wire could be held vertically with lightweight cord in a tree or similar
structure. Four 10′ long ground plane radials are attached to the base at the
ground wingnut. The ~16ft. long radiating element can be wound on the pcb for
easy storage. The device is rated for 10W, has all captive stainless steel
hardware for the antenna, counterpoise connections, and a female BNC for
connection to your radio. With 17′ of 24awg stranded wire it weighs less than
2.5 oz.(70gm). On a difficulty scale of 1 to 5, 5 being the most difficult, this
is rated at 2. Click here for the
assembly manual Please look carefully at all photos
and bid accordingly 100% Positive Feedback! Availability: In Stock and
ready to ship. FAST SHIPPING!!!
Returns Accepted for this item if it's within 30 Days