Rabbit EARS™ Dual Band Antenna Signal Booster for DJI RC RM330 Remote Controller (Not RC-N1) for DJI Mavic 3, Air
2S, Mini 3 Pro and Mini 3 Drone Devices | Maxi
Marine Rabbit EARS™ Dual Band
antenna signal booster (range extender) is
designed to take full advantage of DJI's
OcuSync 2.0/3.0 by supporting the new
automatic band hopping between 2.4 and 5.8
GHz frequencies, which maintains the
strongest signal available during flight.
This also eliminates having to manually
set the band (2.4 or 5.8 GHz) in the DJI
Fly App according to which antenna signal
booster is being used, and physically
switching and carrying two sets of
antennas for different environmental
conditions (urban/rural). Made in the USA,
patent 10910730 and patent pending. Please see our other listings for the DJI RC-N1 controller antenna booster. Antenna
Booster Design For improved signal strength Rabbit EARS™
Dual Band antenna signal booster uses
patented micro/mini pin technology
suspended in an extremely low density foam
body, which provides greater accuracy in it's frequency response and less signal
blockage, for the Mavic 3, Air 2S, Mini 3 pro and Mini 3 controller antennas. Inside the controller body there are two elements instead
of one. The front element is the driven
element connected to the wiring of the
controller and the back element reflects
the signal back to the front element and
is called a reflector. These elements are
familiar to Yagi-Uda antenna designs which
also have director elements in
front of the driven element. Since the
DJI controller antenna already has reflector element inside, it can only benefit
with director elements added in front of the driven element outside. The
director elements must be properly
spaced (progressively) and tuned in
length for the controller/drone, and
made with special polished alloy to
reduce electrical surface resistivity
for optimal performance, unlike existing
antenna boosters. Booster Attachment To attach each antenna
booster, the open slotted end with the labels facing outward onto the front of
the RC
controller closest to the control sticks up against the lip of the housing and
press securely in place (see item photos). If the antennas are attached closer to the middle of the controller, they will not work properly. Each antenna booster can be used on either side of the antenna. For the best performance, make no changes to the default Fly App transmission settings (Dual-band, Auto). If there is little improvement, under "transmission" set the frequency to "5.8 GHz" (in Auto) then immediately back to "Dual-band" (in Auto) with the antenna booster attached. This will start "Dual-band" on 5.8 GHz for the least interference and automatically change according to the best frequency for use with the antenna booster. Specifications Length: 50mm (1.96 inches) Width: 55mm (2.16 inches) Thickness : 10mm ( .39 inches) Weight: 6.0 grams (.21 oz)
Returns Accepted for this item if it's within 30 Days