SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / TV, Video & Home Audio / TV, Video & Audio Accessories / TV & Video Accessories / Signal Amplifiers & Filters
Skywalker 25dB Distribution
Amplifier with VHF / UHF / FM & Variable Gain Boost your signal! The Skywalker Distribution Amplifier is
designed to help increase signal strength from your antenna to the TV. Enjoy
the control of variable gain (with up to 25dB of gain) in the VHF / UHF / FM
bands. This heavy-duty, metal-encased unit features low operating interference
and minimal noise production. Just connect it via the standard F type connector
in/out outlets. It is powered by a 120-volt AC and also features an on/off
status light. Must be
installed by a qualified technician to ensure proper performance and
suitability DO NOT
PURCHASE if not experienced with the distribution of a TV signal Use this distribution amp to strengthen signal
reception from antenna to TV Increases or amplifies a TV signal, however it cannot
create or produce a TV signal Amplifier is NOT designed to work with CABLE TV Sole purpose is to amplify TV signals ranging from 47
to 1000MHz Bandwidth: 47-1000MHz Maximum Input: VHF 40dB MV / UHF 20dB MV Gain: VHF 25dB / UHF 21dB 54-300Mhz: 25dB | 300-806Mhz: 22dB | 900Mhz: 18dB Noise Figure: VHF
6dB / UHF 8dB Gain Control: 10dB Power Consumption: Approximately 2.4 watts Power Requirements: 117VAC 60Hz or 220VAC Main Housing Dimensions: 5.5in L x 3.25in W x 1.5in H End Mount Tab to End Mount Tab: 6.75 in 2-inch height from bottom of housing to top of
"F" connectors
Returns Accepted for this item if it's within 30 Days