SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / Vehicle Electronics & GPS / GPS Accessories & Tracking / GPS Antennas
Model
58517A-05Q • DC Power Input Option • Very Good Used
Condition • Guaranteed • 8 Way N Connectors Item is very lightly used, in very good
cosmetic condition. This is the 05Q version which allows
for the antenna power to be applied by the connector
adjacent to the antenna jack. My understanding is that if
your antenna is powered (which almost all are) then you need
to apply that power via the SMC connector
adjacent to the antenna jack. A matched power supply is
included. Power sent from receiver(s) will not be passed
through the splitter. This is a multiple item listing and
while there will be very small cosmetic differences
between units, the photos are representative of the item
you will receive. No printed manual is included but a copy
may be downloaded from
https://www.prostudioconnection.net/1507/58517a_Manual.pdf Symmetricom’s Active Splitters
allow multiple GPS receivers to share a single antenna.
Designed for both manufacturing and position/timing
redundancy applications, GPS L1 Active Splitters provide
dependable signals for multiple GPS receivers. For large manufacturing facilities,
Symmetricom Active Splitters can provide as many GPS-L1
(1575.42 MHz) signals as your manufacturing floor
requires. With built-in amplification to overcome splitter
losses, the Active Splitters can be conveniently cascaded
without adding separate amplifiers and bias-tees between
splitters. More information may be obtained from the User
Guide at https://www.prostudioconnection.net/1507/58517a_Manual.pdf High Isolation Eliminates Receiver
Interactions Symmetricom GPS Active Splitters have the
essential port-to-port isolation required to eliminate
interaction between multiple GPS receivers. Without such
isolation, local oscillator (LO) leakage from one GPS
receiver can prevent other receivers from acquiring time
and position signals and maintaining lock. In wireless
base station applications, poor isolation can disable cell
sites. In GPS manufacturing tests, poor isolation causes
repeatability problems which can reduce yields and cause
false rework. Convenient DC Power Simplifies Your
Installation Power is conveniently obtained from the GPS
receiver(s) connected to the amplifier. This eliminates
the need for a separate dc power supply and wiring. DC
power applied to the splitter is also passed on for use by
an active antenna, further simplifying your installation. Specifications
Returns Accepted for this item if it's within 30 Days