SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / Radio Communication / Antennas / Other Radio Antennas
The Tecsun AN-48x is an active loop antenna for AM, shortwave, and longwave radios. It is designed to improve AM, shortwave and longwave radio reception. It includes adapters to connect the antenna to BNC and RCA sockets. This greatly simplifies hooking up the antenna to Tecsun receivers like S-2000 and S-8800, while it is just as easy to use with H-501, PL-990, PL-880 and the rest of the "PL"-family. Basic Operation: 1) After connecting the antenna to the radio, tune the radio to a desired radio station. 2) Switch the antenna amplifier to the corresponding frequency band and power on the control box. 3) Adjust the frequency and signal level knobs to enhance the signal. For Shortwave: Connect AN-48x to the external SW antenna jack of your radio, if available. If not available, use the Black and Red connectors to connect the antenna with the telescopic antenna of your radio and a self-made ground wire. For AM and Longwave: Connect AN-48x to the external AM/LW antenna jack of your radio, if available. If not available, connect the control box to the included ferrite coupler and place it near the built-in AM antenna of your radio. For pocket sized radios, use the included base station to keep the ferrite coupler near the AM antenna more conveniently. Power: 2 x AAA battery (not included) What is in the box: English user manual Amplifier with antenna wire Control box TRS male - TRS male cable TRS female - BNC male cable TRS female - RCA male cable TRS female - Black/Red alligator clips Ferrite coupler Base station to support pocket radios Suction cup Hanging clip Loop extension rod
Returns Accepted for this item if it's within 30 Days