Wireless
Bridge,UeeVii CPE-452 Point to Point 5.8G Long Range Outdoor WiFi CPE
with 14DBi High-Gain Antenna,24V PoE Adapter,2 LAN Port,for Network and
Surveillance Range Extension,2-Pack UeeVii CPE-452 is an outdoor high power
and 5.8G high-performance wireless bridge, that supports point to point
and point to Multi-Point wireless connections. Pairing can be done by
dialing without having to access the GUI, making the long-range wireless
coverage, data transmission, and wireless monitoring simple and
professional, and saving much human work and cost. CPE-452 WiFi bridge built-in 14Dbi high-gain antenna enables the
transmission rate between 2 wireless bridges to reach 300Mbps, the
highest wire network speed that can be achieved max is 100Mbps. To
achieve the bridge function, one needs to act as a receiver and the
other one as a transmitter. Point to point wireless bridge can automatically power adjustment to
adapt to environmental changes, ensuring smooth video regardless of
ultra-close distance, transmission distance up to 3km(Barrier-free),
actual application distance should be less than 3KM. Trees will not
block the transmission speed of the point-to-point internet wireless
bridge, suitable for shop warehouses or garages next to your house. Point-to-point bridge easily helps you expand the network range to the
second building(barn, shop, warehouses, garages), or wireless extend the
IP camera monitoring range. IP65 Level weatherproof shell that ensures
continued operation in harsh outdoor environments, very suitable for
outdoor use, with rain, dust, and antifreeze characteristics. Support PoE power supply (50 meters) power supply, easy to install, and
save cost, and compliance with 5.8GHz IEEE 802.11a, IEEE 802.11n
standard, support CSMA/CA, CSMA/CD, TCP/IP, PPPoE, DHCP, ICMP, NAT
protocol. FCC ID: 2A6EJ-CPE450
Product Description
Wireless Bridge Application Case
We have a second building that is about 150' from our main building and
needed stable internet for both employees and security systems. I tried
reaching it with our mesh routers, but even placing one on an outside
wall wouldn't supply a stable signal. We could have installed a second
modem/router but that would add hundreds to our initial install and
monthly costs. Installing this bridge has offered a stable signal and
wiring it into a mesh system, it has allowed us to expand our net
throughout the second building.
How to Access and Setting the Wireless Bridge CPE Through Computer Access: Step
1. Use a PoE adapter to power the wireless bridge through a network
cable. Pay attention to the "PoE" and "LAN" ports marked on the PoE
adapter, and power is supplied by POE instead of a DC power interface. Step
2. Use a network cable to connect the CPE "LAN" port, connect the
network cable other ends to the PoE Adapter "POE" port, use another
network cable to connect to the "LAN" port of the PoE adapter, and
connect the other end of the network cable to the computer's "LAN" port. Step
3. Find the number of the Wireless Bridge CPE digital display tube. For
example, the number is 1 and the CEP is the A master bridge, then the
IP of this CPE is 192.168.255.101; if the CPE is the B slave bridge,
then the IP address of the CPE is 192.168.255.201.(There is a table
corresponding to a number and IP in the manual) Step
4. Very important step: Modify your computer's IP address, change your
computer's IP address to 192.168.255.xxx(192.168.255.xxx cannot be the
same as the IP of the CPE), make your computer's IP and the bridge's IP
address be on the same network segment so that you can access them.
Please refer to the manual to modify the computer IP address step or
Google searches how to modify the computer IP address, it is very
simple. Step 5. After you
modify your computer's IP address, you open the computer browser and
enter the IP address of the wireless bridge to access. For example,
enter 192.168.255.101 to access. Step 6. Enter the account password "admin/admin" to access, and set it after successful access.
Lane Monitoring Application
Display your courtyard camera, garage camera, and driveway camera
images in the monitoring room wirelessly, without digging and burying
lines, destroying the road, and saving costs.
Elevator Monitoring Application
Using a wireless bridge to transmit monitoring signals in elevator
monitoring can effectively avoid cable damage and obtain stable
monitoring images. Wireless bridges are especially important in large
projects, where they can be quickly deployed and easily dismantled for
reuse.
Network Extension Application
Extend the network in the house to your barn, garage, church,
warehouse, even neighbor's house through wireless bridge signal
transmission. No need to install a new modem and pay for it every month,
saving you money.
Helpful Indicator Lights
Change the characters of the digital tube at the bottom of the wireless
bridge to modify the pairing signal channel. The steady light state
indicates that it is working, and the blinking state indicates that it
is being set. The lights on the sideshow the power and LAN connection
status, and the signal lights indicate the signal strength of the paired
2 bridges.
Dual LAN/PoE Port
Wireless bridge has 2 100Mbps RJ45 ports, both of which can accept 24V
PoE power supply, and the CAT 5e network cable can be used as a power
cable to supply power and transmit data. DC power supply is not
recommended. The PoE adapter has a PoE port and a LAN port, and only the
PoE port supplies power.
Switch Master-slave Bridge
Point wireless bridge switches the master and slave bridges through the
A-B button, A represents the master bridge, and B represents the slave
bridge. In point-to-multipoint, take one of the bridges as A, and the
other bridges as B, and then set them to the same pairing character to
complete the point-to-multipoint pairing.
Easy Installation
You can fix the point-to-point bridge on the bracket (ASIN: B09NLLG8MZ)
with metal ties, or you can hang it on the wall; 2 wireless bridges are
installed face to face as much as possible, with a clear view. It is
recommended to purchase the UeeVii Universal Bridge Bracket.
Returns Accepted for this item if it's within 30 Days