SKU: N/AThis site contains affiliate links for which we may be compensated
Computers/Tablets & Networking / Home Networking & Connectivity / Other Home Networking
UPC: 741360888135 The TP513 Wireless Yagi WiFi Antenna is ideally suited for directional and multi point 2.4 MHz band applications. This 17dBi 2.4Ghz Outdoor Yagi Antenna offers 24° Vertical and 25° Horizontal Beamwidth. 35 Inch long WiFi Antenna comes with an N-Female pigtail connector and N-Female industry standard connector. The Yagi antenna operates without the need for a grounding in most cases. However, you can ground antenna via the outer conductor of the connector and the cable, or through the mounting hardware. We do, however, recommend you install a lightning surge protector between the Yagi and a device to prevent a lightning strike to the antenna from damaging your device and equipment. Wireless Yagi Antenna TP513 in most cases can not be attached directly to the device (wifi router, signal booster, etc.) without some type of cable converter/adapter. This Antenna has N-Female connector so it will need the cable/converter from N-Female type to [your device connector type], usually some pigtail coax RP-SMA cable connector. Also, you can put amp of some kind or signal booster between device and antenna. The antenna does not come with mast pole mount; it comes with two U-bolts which can be used with the attached plate for pole mounting. It allows horizontal or vertical polarization. The Panel antenna is used to direct the WiFi beam. It will increase the signal/reception in the direction it is pointing. Electrical Data: Frequency: 2400-2483 MHz Gain: 17 dBi VSWR:<1.5:1 Polarization: Horizontal or Vertical Horizontal Beamwidth: 25° Vertical Beamwidth: 24° Nominal Impedance: 50 Ohms F/B Ratio: >18 dB Max Input Power: 100 W Lightning Protection: DC Ground Mechanical Data: Connector: N Female Dimensions: 35.04in Weight: 1.01 lb Cable Length: 9.45in Reflector Material: Aluminum Alloy Antenna Material: Mast Mast Size: Ø40-Ø50mm Rated Wind Velocity: 210km/h Operating temperature: -40~+65C Mounting hardware included 2x U-Bolts 2x mounting bracket 4x screw nuts 8x washers To mount this antenna, insert U-bolts around the mast pole and put them in the mounting bracket. Secure it with washers and screw nuts.
Returns Accepted for this item if it's within 30 Days